YAMAHA TF1

General specifications

Sampling frequency rateInternal
48 kHz

Signal delay
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz

Total harmonic distortion
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)

Hum & noise levelEquivalent input noise
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)

Residual output noise
–85 dBu, ST master off (Measured with an A-Weight filter)

Crosstalk
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.

Power requirements
100–240 V 50/60 Hz

DimensionsW
510 mm (20.1in)

H
225 mm (8.9in)

D
599 mm (23.6in)

Net weight
13.5 kg (29.8lb)

Accessories
Quick Guide, Power Cord, CUBASE AI download information

Frequency response
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT

Power consumption
100 W

Others
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C

Dynamic range
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.

Fader
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders

Options
Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5)

Outline

Input channel functions
8 DCA Groups

I/OExpansion slots
1

On-board processorsDSP
8 Effects + 10 GEQ

USB
34×34 USB Audio Interface, 2-track recording via USB Storage Device

Fader Configuration
16 + 1 (Master)

I/OInputs
16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)

Outputs
16 (XLR)

Mixing CapacityInput Channels
40 (32 mono + 2 stereo + 2 return)

Aux Buses
20 (8 mono + 6 stereo)

Stereo Buses
1

Sub Buses
1