PRESONUS PRM-1 PRECISION REFERENCE OMNI DIRECTIONAL CONDENSER МИКРОФОН

Accurate MeasurementPreSonus PRM1: Precision Reference Microphone
A professional measurement tool.The PRM1 Precision Reference Microphone is a special type of microphone that provides an accurate reproduction of a room’s sound characteristics for use with audio-analysis tools. It employs a ¼”, pre-polarized electret-condenser capsule with an omnidirectional polar pattern, which allows the microphone to measure reflections, as well as direct signals up to 132 dB SPL. The PRM1 has an all-metal chassis and comes with a clip, foam windscreen, and hard case.
What makes the PRM1 different from most mics?Unlike mics you use for recording and live sound, the PRM1 has a narrow dynamic range, since it is intended to receive test frequencies, such as pink noise, at a fixed level. As a result, it is not recommended for recording or performance—but it’s the right mic for tuning a sound system to perform accurately in a venue. The PRM1 exhibits linear (“flat”) frequency response between 20 Hz and 20 kHz, meaning it captures all frequencies equally within that range. Since it neither boosts nor cuts frequencies, it doesn’t color the sound, making it ideal for measuring what a room or speaker is doing to a sound system’s outgoing signal.
Designed for use with Smaart and other audio analysis tools.While the PRM1 can be used for a variety of measurement applications, such as MLSSA™, Spectrafoo™, and TEF™, it is especially recommended for use with the Smaart® System Check wizards that are integrated into PreSonus® UC Surface control software for StudioLive® AI and StudioLive RM mixers. With this combination, you can have a complete, powerful, and affordable, audio-analysis and correction system.
FEATURES

¼-inch, pre-polarized electret-condenser capsule
Linear frequency response between 20 Hz and 20 kHz
Omnidirectional polar pattern
Low noise, low distortion
All-metal chassis
Comes with a clip, foam windscreen, and hard case
High-quality components and rugged construction
Suitable for system analysis and measurement
Especially recommended for use with PreSonus® StudioLive® mixers and VSL with Smaart® Measurement Technology

SPECS
General

Type: Black electret condenser
Element: Pressure, FET preamplifier
Polar Pattern: Omnidirectional

Performance

Frequency Response: 20 Hz to 20 kHz
Sensitivity: (@ 1 kHz open-circuit voltage) -37 dB/Pa (14 mV/Pa) 1 Pa=94 dB SPL
Rated Impedance: 200Ω
Minimum Load Impedance: 1,000Ω
EIN (A-weighted): 26 dB
Max. SPL (1 kΩ load): 132 dB SPL (THD ≤ 1%, 1 kHz)
Dynamic Range (1 kΩ load): 106 dB
S/N Ratio: 70 dB

Connections

Polarity: Pin 2 output positive voltage (relative to Pin 3) when diaphragm receives positive pressure (moves inward)
Connector: 3-pin XLR Male

Power

Phantom Power: 9-52V
Current Consumption: 2 mA

Physical

Length: 7.56” (192 mm)
Width: 0.83” (21 mm)
Weight: 5.3 oz (150g)
Finish: Metal, matte black
Environmental Conditions: 10-50˚ C, humidity 0-95%

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.