BOSS DD8 DIGITAL DELAY

Amazing Versatility

Equipped with a diverse selection of delays, the DD-8 packs impressive sonic range into one small pedal. Clean digital delays, vintage analog and tape types, and modulation echo are available, plus specialty delays like shimmer and reverse. There’s a new Warm type for softer echo tones, and a +RV type that blends delay and reverb together. Warp is perfect for dynamic ambient textures, while the new GLT type is great for glitchy rhythmic effects.

Stereo to the Max

Everything sounds bigger and better in stereo, and the DD-8 delivers with full stereo I/O support and your choice of three output modes. The default independent mode provides linked parallel delays on the left and right channels, allowing you to maintain the true balance of stereo input sources in the effect sound. There’s also a panning mode for ping-pong delay effects, and a wide stereo mode for enhanced spatial depth.

Express Yourself

The DD-8’s extensive real-time delay options help bring your music to life. You can tap in tempos with the onboard pedal switch, and control the Warp and GLT modes for unique expressive effects. Adding one or two footswitches unlocks more creative possibilities, like on-demand tap tempo, extended looper control, and a cool Twist effect for soaring echo sounds. Alternately, an expression pedal can be used for continuous control of level, feedback, or delay time—or all of them at once.

Built-In Looper

Having a looper on your pedalboard is a handy thing—it’s great for practice, checking sounds at gigs, and creating on-the-fly backing while performing. The DD-8’s looper mode has you covered, so you don’t have to take up precious space with a dedicated pedal. All looper functions can be controlled with the onboard switch, providing all-in-one operation. But if you prefer to work with extended controls, just connect one or two footswitches tooperate the looper’s stop and clear functions externally.

Smart I/O for Easy Setup

The DD-8’s inputs and outputs have smart functionality, allowing you to set the pedal for any application simply by connecting cables in different ways. A variety of mono and stereo connections are supported, including discrete dry and effect outputs for wet/dry setups. It’s even possible to defeat the dry signal entirely, perfect for delay-only blending in a parallel effects loop.

• Nominal Input Level-20 dBu
• Input Impedance1 M ohm
• Nominal Output Level-20 dBu
• Output Impedance1 k ohm
• Recommended Load Impedance10 k ohms or greater
• BypassBuffered bypass
• Controls
• MODE knob
• TIME knob
• FEEDBACK knob
• E.LEVEL(Effect Level) knob
• CARRYOVER switch
• Pedal switchIndicator
• CHECK indicator (Used for indication of check battery)
• Connectors
• INPUT-A(MONO)/INPUT-B jack: 1/4-inch phone type
• OUTPUT-A(MONO)/OUTPUT-B jack: 1/4-inch phone type
• TEMPO/EXP jack: TRS 1/4-inch phone type
• DC IN jack
• Power Supply
• Alkaline battery (9 V, 6LR61)
• AC adaptor (PSA series: sold separately)
• Current Draw65 mA
• Expected battery life under continuous use
• Alkaline: Approx. 5 hours
• *These figures will vary depending on the actual conditions of use.
• Accessories
• Owner’s manual
• Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
• Dry battery (9 V, 6LR61)
• Options (sold separately)
• AC adaptor: PSA series
• Footswitch: FS-5U, FS-6, FS-7
• Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5

SIZE AND WEIGHT

• Width73 mm
• 2-7/8 inches
• Depth129 mm
• 5-1/8 inches
• Height59 mm
• 2-3/8 inches
• Weight (including battery)440 g1 lb